home *** CD-ROM | disk | FTP | other *** search
- Path: stdin.gatelink.fr.net!centaury!dtartavel
- From: dtartavel@centaury.gatelink.fr.net (Daniel TARTAVEL)
- Subject: Re: Warp-Engine/A4000 conflict(HELP!)
- References: <4ko8n6$49m@news.wko.com> <4l3osn$jaq@castle.nando.net>
- Message-ID: <736.6683T742T1308@centaury.gatelink.fr.net>
- Newsgroups: comp.sys.amiga.hardware
- X-Newsreader: THOR 2.2 (Amiga;UUCP) *UNREGISTERED*
- Date: Fri, 19 Apr 96 12:44:07 +0200
- Organization: JanaL
-
-
- >I have a V-Lab in my A4000 C= A3640 card and it works fine but when I tried
- >to put a retina z3 card it it wasn't found by the system. The vlab was gone
- >and the retina was not found. A second card did the same thing and all I
- >got from macro was it's the 4000 not the retina. The retina is perfect C=
- >changed the 4000 chips all the time so it the 4000 not macro that has the
- >problem.... Good luck on getting to work....
-
- > Cory Palmer
- > cpalmer@nando.net
-
-
- Hello ,
-
- I have a A3000T with V-Lab Motion, and when i put this card after the
- others on the bus, the computers don't recognize them at boot.
- Test to change cards positions in your Amiga.
-
- Bye.
- E-Mail:dtartavel@centaury.gatelink.fr.net
-